Pulse oximeter monitoring
FDA-cleared fingertip pulse oximeters with automatic data transmission. Monitor SpO2 saturation and pulse rate for COPD, CHF, post-surgical, and sleep apnea patients, with no patient tech required.
98% SpO2 · pulse 68 · on the dashboard instantly
The patient experience
Zero setup. Zero learning curve.
The clip-on fingertip sensor requires zero setup: no smartphone pairing, no app, no technical knowledge. Ideal for elderly and cognitively impaired populations.
In real life
A reading between sips of coffee.
Every reading flows into the CCN Health platform instantly. Configurable thresholds flag desaturation events for COPD exacerbations, post-op complications, and nocturnal hypoxemia.
How readings flow
From the fingertip to your dashboard.
Configure per-patient alert thresholds based on baseline condition and clinical context, so COPD baselines and post-surgical targets are managed independently.
Clip & Measure
Patient places the fingertip sensor. A single press begins continuous SpO2 and pulse rate measurement.
Transmit Automatically
Readings sync via Bluetooth to the Tenovi Gateway or directly over cellular. No smartphone or Wi-Fi required.
Alert & Intervene
Desaturation events trigger real-time alerts. Clinical staff review trends and act before hospitalization.
What your team sees.
95-100%
Normal
90-94%
Low
<90%
Critical
Dorothy H.
97% SpO2 · 74 bpm
Frank M.
91% SpO2 · 88 bpm
Nancy R.
95% SpO2 · 70 bpm
Arthur J.
88% SpO2 · 96 bpm
Ruth B.
98% SpO2 · 66 bpm
Three pathways. Zero Wi-Fi required.
Every reading reaches the platform without home Wi-Fi or a patient smartphone requirement. Choose the pathway that fits each patient, or mix all three across the same panel.
Built-in cellular
Standalone cellular
The SmartMeter iOximeter is a standalone cellular pulse oximeter with a built-in SIM: readings transmit directly without any companion device.
Bluetooth Low Energy
Direct to the CCN Health app
In facility settings the oximeter connects via Bluetooth to the CCN Caregiver App: a caregiver walks room to room and each reading is attributed to the correct record automatically.
4G LTE hub
Through the cellular gateway
Pairs with the Tenovi cellular gateway for automatic transmission. No smartphone or Wi-Fi needed.
Supported pulse oximeters.
Validated fingertip sensors matched to your patient population and clinical workflow.
Tenovi Bluetooth Oximeter
Pairs with the Tenovi Gateway for fully automatic cellular data transmission. No smartphone or Wi-Fi needed.
Jumper JPD-500G
Bluetooth fingertip oximeter with OLED display, 10-hour memory, and adjustable brightness for bedside use.
SmartMeter iOximeter
Standalone cellular pulse oximeter with built-in SIM. Readings transmit directly without any companion device.
Masimo MightySat
Clinical-grade accuracy with Perfusion Index and Pleth Variability Index for advanced respiratory monitoring.
Clinical-grade accuracy.
FDA-cleared pulse oximeters validated against arterial blood gas measurements. Dual-color OLED display for clear bedside readings with seamless platform integration via Bluetooth Low Energy.
SpO2 Range
70-100%
SpO2 Accuracy
±2% (70-100%)
Pulse Range
30-250 bpm
Pulse Accuracy
±2 bpm
Connectivity
Bluetooth Low Energy
Battery
AAA × 2 (~30 hrs)
Display
Dual-color OLED
Weight
~50g with batteries
Clinical-Grade Accuracy
FDA-cleared devices with ±2% SpO2 accuracy validated against arterial blood gas measurements. Meets CPT 99454 data transmission requirements.
Simple for Every Patient
Clip-on fingertip sensor requires zero setup: no smartphone pairing, no app, no technical knowledge. Ideal for elderly and cognitively impaired populations.
Multiple Connectivity
Pairs with the Tenovi cellular gateway for automatic transmission, or connects via Bluetooth to the CCN Caregiver App in facility settings.
On the platform
The answers, straight.
CCN Health supports FDA-cleared finger-clip pulse oximeters that measure SpO2 and pulse rate. Devices transmit readings via cellular or Bluetooth connectivity to the CCN Health platform automatically.
COPD (J44.x), asthma (J45.x), heart failure (I50.x), sleep apnea (G47.33), pulmonary fibrosis (J84.x), and post-COVID respiratory monitoring qualify. Any condition requiring ongoing oxygen saturation monitoring may be eligible.
Readings flow automatically into the CCN Health dashboard. Configurable alerts notify staff when SpO2 drops below clinical thresholds (typically <92% for COPD, <95% for general populations). Data syncs to the connected EHR.
Yes. A single patient can be monitored with multiple device types (BP + SpO2 + weight) and all readings count toward the 16-day CPT 99454 requirement. This stacks the clinical value while using the same billing framework.
All CCN Health pulse oximeters are FDA-cleared with ±2% SpO2 accuracy in the 70-100% range and ±2 bpm pulse rate accuracy. Devices meet ISO 80601-2-61 standards for pulse oximeter performance.
One platform, eleven device categories.
Pulse Oximeter is one piece. Cellular scales, glucose meters, pulse oximeters, sleep sensors, and more all feed the same dashboard, the same alerts, and the same billing engine.
